HOPE Conversion Kit For Pro 2 / Pro 2 Evo Hubs

For any type of fork or rear triangle: the Conversion Kit for Pro 2 / Pro 2 Evo Hubs by Hope
Hope conversion kits convert your Hope hubs to the corresponding installation standards and thus enable versatile use of the hubs.
In contrast to the Pro 2 hub, it is no longer necessary to change the axle on the Pro 2 Evo rear hub, so that here too it is only necessary to work with end caps.
Models:Adapter for 6-bolt Front Hub
Type 1:
Convertible to: front thru-axle 20 x 110 mmBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB420
Type 2:
Convertible to: front quick release 9 x 100 mmBase Model: front thru-axle 20 x 110 mm, thru-axle 15 x 100 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB419
Type 3:
Convertible to: front thru-axle 15 x 100 mmBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB441
Type 4:
Convertible to: front thru-axle 9 x 100 mm ThruBoltBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB443
Type 5:
Convertible to: front thru-axle 12 x 100 mmBase Model: front 9 x 100 mm quick release, 15 x 100 mm thru-axleCompatibility: Pro 2 EvoManufacturer Number: HUB482
Type 6:
Convertible to: front thru-axle 15 x 110 mmBase Model: front thru-axle 15 x 100 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB1009-14NManufacturer’s note: The adapter is mounted on the right side of the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 7:
Convertible to: front thru-axle 15 x 110 mm SRAM Torque, thru-axle 15 x 100 mm SRAM TorqueBase Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB486Manufacturer’s note: The adapter is mounted on the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 8:
Convertible to: front thru-axle 15 x 100 mm SRAM TorqueBase Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB485
Type 27:
Convertible to: 20 mm front hub thru-axle (20 x 110 mm)Base Model: front thru-axle 15 mm (15 x 110 mm)Compatibility: Pro 2 / Pro 2 EvoManufacturer Number: HUB494
Adapter for 6-bolt Rear Hub
Type 9:sold-outConvertible to: rear thru-axle 12 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 2Manufacturer Number: HUB222
Type 10:sold-outConvertible to: rear thru-axle 10 x 135 mmBase Model: rear quick release 10 x 135 mm, thru-axle 12 x 142 mmCompatibility: Pro 2Manufacturer Number: HUB223
Type 11:sold-outConvertible to: rear bolt-on axle 10 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 2Manufacturer Number: HUB224
Type 12:
Convertible to: rear quick release 10 x 135 mmBase Model: rear thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 142 mmCompatibility: Pro 2Manufacturer Number: HUB225
Type 13:
Convertible to: rear thru-axle 12 x 142 mm SyntaceBase Model: rear quick release 10 x 135 mm, thru-axle 10 x 135 mm, thru-axle 12 x 135 mmCompatibility: Pro 2Manufacturer Number: HUB231
Type 14:
Convertible to: rear thru-axle 12 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 2 EvoManufacturer Number: HUB241
Type 15:
Convertible to: rear thru-axle 10 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 2 EvoManufacturer Number: HUB239
Type 16:
Convertible to: rear bolt-on axle 10 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 2 EvoManufacturer Number: HUB240
Type 17:
Convertible to: rear quick release 10 x 135 mmBase Model: rear thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 142 mmCompatibility: Pro 2 Evo / Pro 4Manufacturer Number: HUB238
Type 18:
Convertible to: Rear thru-axle 12 x 142 mm Syntace, thru-axle 12 x 157 mm (only compatible with version 12 x 150 mm)Base model: rear quick release 10 x 135 mm, thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 150 mmCompatibility: Pro 2 Evo / Pro 2 Evo Fatsno / Pro 4Manufacturer Number: HUB242
Adapter for Trial / Singlespeed
Type 19:sold-outConvertible to: front / rear quick releaseBase Model: front / rear threaded axle 10 mmCompatibility: Pro 2 Evo Trial / Pro 2 EVO SinglespeedManufacturer Number: HUB249
Type 20:sold-outConvertible to: front / rear quick releaseBase Model: front / rear threaded axle 10 mmCompatibility: Pro 2 Trial / Pro 2 SinglespeedManufacturer Number: HUB250
Type 21:sold-outConvertible to: rear thru-axle 12 x 135 mmBase Model: rear threaded axle 10 mmCompatibility: Pro 2 Evo Trial / Pro 2 EVO SinglespeedManufacturer Number: HUB252Adapter for Fatsno:Type 22:sold-outConvertible to: front quick release 9 x 100 mmBase Model: front threaded axle 10