HOPE Conversion Kit For Pro 4 Hubs

For any type of fork or rear triangle: the Conversion Kit for Pro 4 Hubs by Hope
Hope conversion kits convert your Hope hubs to the corresponding installation standards and thus enable versatile use of the hubs.
With the Pro 4 rear hub it is no longer necessary to change the axle, so that here too it is only necessary to work with end caps.
Models:Front Hub Adapter
Type 1:
Convertible to: front thru-axle 20 x 110 mmBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mmCompatibility: Pro 4Manufacturer Number: HUB420
Type 2:
Convertible to: front quick release 9 x 100 mmBase Model: front thru-axle 12 x 100 mm, thru-axle 15 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 4Manufacturer Number: HUB419
Type 3:
Convertible to: front thru-axle 15 x 100 mmBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 20 x 100 mmCompatibility: Pro 4Manufacturer Number: HUB441
Type 4:
Convertible to: front thru-axle 9 x 100 mm ThruBoltBase Model: front quick release 9 x 100 mm, thru-axle 12 x 100 mm, thru-axle 15 x 100 mm, thru-axle 20 x 110 mm, thru-axle 15 x 100 mmCompatibility: Pro 4Manufacturer Number: HUB443
Type 5:
Convertible to: front thru-axle 12 x 100 mmBase Model: front 9 x 100 mm quick release, 15 x 100 mm thru-axleCompatibility: Pro 4Manufacturer Number: HUB482
Type 6:
Convertible to: front thru-axle 15 x 110 mmBase Model: front thru-axle 15 x 100 mmCompatibility: Pro 4Manufacturer Number: HUB1009-14NManufacturer’s note: The adapter is mounted on the right side of the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 7:
Convertible to: front thru-axle 15 x 110 mm SRAM TorqueBase Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 4Manufacturer Number: HUB486Manufacturer’s note: The adapter is mounted on the front wheel. The wheel must then be re-trued so that it runs in the centre of the fork again.

Type 8:
Convertible to: front thru-axle 15 x 100 mm SRAM TorqueBase Model: front thru-axle 15 x 100 mm, quick release 9 x 100 mm, thru-axle 20 x 110 mmCompatibility: Pro 4Manufacturer Number: HUB485
Type 18:
Convertible to: front thru-axle 20 mm (20 x 110 mm Boost)Base Model: front thru-axle 15 mm (15 x 110 mm)Compatibility: Pro 4Manufacturer Number: HUB494
Rear Hub Adapter
Type 9:
Convertible to: rear thru-axle 12 x 135 mm, rear thru-axle 12 x 150 mmBase Model: rear quick release 10 x 135 mm, rear thru-axle 12 x 157 mmCompatibility: Pro 4Manufacturer Number: HUB241
Type 10:
Convertible to: rear thru-axle 10 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 4Manufacturer Number: HUB239
Type 11:
Convertible to: rear bolt-on axle 10 x 135 mmBase Model: rear quick release 10 x 135 mmCompatibility: Pro 4Manufacturer Number: HUB240
Type 12:
Convertible to: rear quick release 10 x 135 mmBase Model: rear thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 142 mmCompatibility: Pro 4Manufacturer Number: HUB238
Type 13:
Convertible to: rear thru-axle 12 x 142 mm Syntace, thru-axle 12 x 157 mm only compatible w/ 12 x 150 mm versionBase model: rear quick release 10 x 135 mm, thru-axle 10 x 135 mm, thru-axle 12 x 135 mm, thru-axle 12 x 150 mm – Compatibility: Pro 4
Manufacturer Number: HUB242
Adapter for Fatsno
Type 14:
Convertible to: front thru-axle 15 x 135 mmBase Model: front quick release 9 x 135 mmCompatibility: Pro 4 FatsnoManufacturer Number: HUB474
Type 15:sold-outConvertible to: front quick release 9 x 135 mmBase Model: front thru-axle 15 x 135 mmCompatibility: Pro 4 FatsnoManufacturer Number: HUB475
Type 16:sold-outConvertible to: front thru-axle 15 x 142 mmBase Model: front 9 x 135 mm quick release, 15 x 135 mm thru-axleCompatibility: Pro 4 FatsnoManufacturer Number: HUB476
Type 17:sold-outConvertible to: front thru-axle 15 x 150 mmBase Model: front quick release 9 x 135 mm, thru-axle 15 x 135 mm, thru-axle 15 x 142 mmCompatibility: Pro 4 FatsnoManufacturer Number: HUB480
Note:Rear hubs with a 12 x 150 mm over locknut dimension cannot be converted with conversion kits because the hub shell is wider than standard versions.Contents:1 x Hope conversion kit for Pro 4 hubs