Mavic ITS4 Freehub Body As Of 2012

The ITS4 freehub body is compatible with Mavic CrossMountain, Enduro and Extreme wheels as of 2012 with QRM/QRM+ rear hubs with 150 mm or 135/142 mm over locknut dimensions.
Specifications:Application:Cross Country, All Mountain, Enduro, DownhillFreehub:Shimano MTBGearing:8-/9-/10-/11-speedFreehub Body Type:ITS4Technical Information:Freehub Body Material:AluminiumCompatibility:Crossmax SLR Disc 2012-2015Crossmax ST Disc 2012-2015Crossmax SX Disc 2012-2014Crossline model 2012Deemax Ultimate / DH 2012-2019Crosstrail model 2013Crossmax Enduro models 2014/2015Crossmax SL model 2015Crossmax SL Pro model 2016Crossmax XL model 2015Crossmax XL Pro model 2016Deemax Pro as of model 2017Crossmax Pro Carbon model 2017/2018XA Pro Carbon model 2017/2018XA Elite model 2017/2018Crossmax Elite model 2017/2018Crossmax Pro model 2017/2018XA Elite 27+ 2018
Note:
The Mavic ITS4 freehub body is supplied as standard with a plastic washer which must be removed depending on the locknut installed. There are locknuts with and without a groove. If you have a locknut without a groove, the plastic washer must be removed during assembly. But if you already have one with a groove, you don’t have to pay attention to anything else during assembly.

For ITS4 wheels as of2018 with QRM Auto hubs, you need to use the Shimano freehub body for ITS4 QRM Auto.

Manufacturer Number:
35126001
Contents:1 x Mavic ITS4 freehub body with lip sealOrder Together:pawls